We use cookies to improve the quality of your experience on this website. By continuing to browse the website, you agree to our use of cookies. To change settings, please read our policy.
High-quality HBI differs from Premium-Quality hot-briquetted iron (iron ore briquettes) in its lower total iron and metallic iron content.
It can be used as a raw material and as a component of the burden for electric arc furnaces or in blast furnace production.
| Enterprise | Lebedinsky GOK |
| Normative document name | TU 24.10.13-010-00186803-2020 |
| Briquette length (mm) | 100-120 |
| Briquette width (mm) | 45-55 |
| Briquette thickness (mm) | 30-40 |
| Weight content of reference grain size lower than 6.35 mm (%) (when transported by sea) | maximum 5.0 |
| Weight content of reference grain size lower than 4 mm (when transported by any other transport except for sea) | maximum 7.0 |
| Bulk density (kg/dm3) | 2.50-3.30 |
| Specific loading volume (dm3 / kg) | 0.3-0.4 |
| Angle of repose (degrees) | 27.2-33.7 |
| Briquette density (g/cm3) | 4.8 |
| Briquette weight (kg) | 0.5-2.0 |
| Distinctive characteristics and properties |
HBI wetted by atmospheric precipitation, both during open storage and when stored in the hold of a vessel for sea transportation, may temporarily self-heat to temperatures of 45–65°C, releasing steam and hydrogen gas. During the oxidation process, HBI absorbs oxygen, which may make the atmosphere in the premises hazardous for people entering the area. HBI may ignite when exposed to open flames or molten metal droplets, when in contact with heated materials or flammable substances, or when wetted with seawater. |
| Industrial applications | Steel industry |
| Area of application | Steelmaking |
| Сharacteristic | Value |
|---|---|
| Fe total content (%) |
89.0
|
| Fe metallic content (%) |
80.1
|
| S content (%) |
0.02
|
| P content (%) |
0.015
|
| SiO2 content (%) |
4.8
|
| C content (%) |
0.8
|
| Minimum order | The quantity of each shipment shall be determined by mutual agreement between the parties. |
| Transportation requirements | By all means of transport in accordance with the transportation regulations applicable to each specific transport, including requirements concerning labelling. HBI shall be transported under conditions that prevent contamination and mixing with other materials and ensure that the cargo does not spill or become wet during transportation by water. When HBI is transported in bulk by water, the holds shall be watertight. |
| Storage requirements |
Storage areas for HBI shall have a solid, non-combustible surface free of depressions where water may accumulate. Foreign objects and materials must not be allowed to enter the stockpile of HBI. The movement of any bulk materials over the stockpile is prohibited, as is the storage of fine-grained (dust-forming) materials or the location of heat sources in close proximity to HBI storage areas. HBI must not be exposed to open flames, electric or gas welding, contact with objects having a temperature exceeding 65°C, electrical busbars, molten metal, or seawater. HBI shall be stored under conditions that prevent contamination and mixing with other materials. |
| Note |
Under the International Maritime Solid Bulk Cargoes (IMSBC) Code, HBI is classified as a Group B cargo (cargoes possessing chemical hazards). When HBI is stored in an open-air stockpile and exposed to atmospheric precipitation, the metallic iron content of the surface layer may decrease by 2-3% per month. The handling procedures for HBI shall ensure that damage to the material is kept to a minimum. A magnetic grab shall be used during HBI loading and unloading operations. In seaports, dropping the material from a height of no more than 1.0 m is permitted. |